GOODE Ski Technologies recommends a one degree base edge bevel. This aids in the skis' superior gliding characteristics by keeping the base edge slightly off the surface of the snow. A side edge bevel equal to that of the based edge is also recommended so that a 90 degree edge is maintained. This allows for the best overall performance in all conditions.

Base

GOODE skis come from the factory with a precision stone-ground finish for the best performance in all conditions. Because of the high molecular weight ISO-speed graphite sintered base used in their construction, the skis should always be stone ground after any belt sanding is performed. Any rock damage should be repaired using a base weld. It is recommended that the ski base always have a coat of graphite impregnated wax to prevent severe drying of the base.